The global site of the UK's leading magazine for automation, motion engineering and power transmission
2 October, 2022

Twitter link

Putting a lid on tilted bottle-tops

10 April, 2013

Voigt’s suggestion was to use a single smart camera to perform presence inspections and to monitor for tilted caps. Using “blob” (binary large object) analysis, the camera can handle variations in the PET bottles and simultaneously detect caps tilted in any direction, 360° around the neck of the bottle.

Blobs are contiguous areas of pixels whose light intensities lie between defined boundaries. By restricting blob features such as length, width, height, surface, shape factor or circumference, individual objects or groups of objects can be detected and differentiated reliably on the basis of their geometric features – even when other processes are supplying incorrect results.

“The high process reliability when monitoring for tilted cap position is also largely based on the option of tracking test ranges” explains Voigt. The bottle cap is “searched” both horizontally and vertically with additionally-created test fields to track the actual test fields. This compensates for position shifts and height tolerances. The support ring in the bottle’s neck area is used as a reference (as shown in the screenshot above). The distances from both sides of this ring to the retaining ring under the cap, as well as height and width data of the cap, provide information about whether it is in the correct position.

The Voigt system consists of a Leuze LSIS 412i smart camera equipped with an opposing transmitted light source (shown above), instead of using its own illumination. A retro-reflective photoelectric sensor with a polarisation filter is used for triggering. This enables reliable detection of transparent media. The camera, with a 1kHz switching frequency and a 0.5ms response time of, is ideal for triggering mineral water bottles. An output signal from the camera controls a downstream diverter directly.

A big advantage of the LSIS 412i camera for Voigt is that it “unites all of the necessary components, from image processing to data memory, and display to interfaces, in one device”. Program memory and image processing are built into the camera, which is configured via a Web browser. No extra connections are needed. The robust metal housing incorporates scratch-resistant protective glass and is IP67-protected, thus meeting the demands of the beverage-filling industry.

“The new system for monitoring tilted cap position is considerably more economical and easier to use than conventional solutions,” says Voigt. “In addition, it does not require setting or any maintenance worth mentioning by the user. Furthermore, the detection rate is an excellent 99.8%.”

  • To view a digital copy of the latest issue of Drives & Controls, click here.

    To visit the digital library of past issues, click here

    To subscribe to the magazine, click here



Drives Show 2024The next Drives & Controls Exhibition will take place in Birmingham, UK, from 16-18 April, 2024. For more information on the event, visit the Show Web site


"Do you think that robots create or destroy jobs?"



Most Read Articles